A. PERMABOND A126
Features & Benefits
Vibration resistant
Can be applied post‐assembly
Improved fatigue life
Seals porosity in welds and castings
WRAS approval for drinking water
Description
Permabond A126 is a high‐strength anaerobic
adhesive for permanent assembly of coaxial
assemblies or threaded metal components. The
exceptionally low viscosity of this product makes it
ideal for use on tight fitting components or where
the adhesive needs to be applied after assembly. In
addition it may also be used to seal porosity in welds
or castings.
A126 can withstand higher temperatures for brief periods
(such as for paint baking and wave soldering processes)
providing the joint is not unduly stressed. The minimum
temperature the cured adhesive can be exposed to is ‐
55°C (‐65°F) depending on the materials being bonded.
B. PERMABOND A1046
Features & Benefits
Toughened
Rapid cure
Ideal when bonding dissimilar materials
Improved fatigue life
Description
Permabond A1046 is a rapid curing adhesive
designed to provide permanent locking and sealing
of metal parts such as bearings, gears, pulleys and
threaded components. It exhibits high strength and
excellent durability, even under the most arduous
conditions. Permabond A1046 helps joints resist
vibration, fatigue and fretting corrosion, which
allows machining tolerances to be relaxed and
mechanical locking devices to be eliminated.
Permabond A1046 will help reduce processing costs.
C. PERMABOND ET510
Features & Benefits
Adhesion to a wide variety of substrates
Full cure at room temperature
Easy to apply
High shear and peel strength
Good impact strength
Description
PERMABOND ET510 is a two-part, 1:1 mixable epoxy
adhesive. ET510 is a semi-flexible toughened epoxy
adhesive with good adhesion to a variety of
substrates such as wood, metal, ceramics and some
plastics and composites. The product cures rapidly at
room temperature reaching handling strength in 15
minutes.
Once cured, Permabond ET510 has good chemical
and environmental resistance.
